Spring Cleaning Part 1: How to Clean Your Moulding

It’s officially spring and that means it’s time to think about doing some spring cleaning. To help you freshen up your home and get it in tip-top shape, we’ll be sharing some of our favorite cleaning tips.

Woodgrain moulding
Photo by Sarah Dorio for Woodgrain

This week we’re focusing on how to clean your interior moulding, whether it’s on the floor, walls, windows or ceiling.

Beautify Your Baseboards

You probably clean your floors pretty often, but likely forget about cleaning the baseboards just above your floor. A lot of dust and dirt can accumulate on these baseboards and cleaning them every once in a while can make a huge difference. According to DIY Network the best way to keep your baseboards tidy is to follow a 4-step process.

Cleaning baseboards
Don’t forget the rubber gloves!
  1. Vacuum the baseboards using the brush attachment.
  2. Wipe the baseboards with a sponge or soft cloth that’s been dipped in a mixture of water, dish soap and vinegar.
  3. Using a cotton swab or toothbrush, clean the top of the baseboards, grooves of the trim and crevices between the baseboards and the floor.
  4. Protect your baseboards from dirt by periodically rubbing them with a dryer sheet.

Check out the full article to get more baseboard cleaning tips. 

 

Clean Crown or Ceiling Moulding

The thought of cleaning the moulding on your ceiling or top of your walls can seem daunting, but it’s actually very easy. Better Homes and Gardens recommends first removing dust by using a vacuum with a brush attachment, feather duster or soft paint brush.

cleaning crown moulding
You can even use a broom to dust crown moulding!

Next, you’ll want to mix your own DIY all-purpose moulding cleaning solution. To make this you’ll need:

  • 1 cup ammonia
  • ½ cup white vinegar
  • ¼ cup baking soda
  • 1 gallon warm water

BHG recommends pouring the solution into a spray bottle and wiping a small section of the moulding to make sure that it doesn’t cause any discoloration of the moulding. After you clean each small section, rinse with water and wipe the moulding dry with a soft cloth.

 

Wipe Down Window Moulding

It can be challenging to keep the trim around your windows clean, especially because they are exposed to moisture, handprints, dirt, dust and grease. Luckily, doityourself.com has some simple tips to keep your window moulding spotless.

Window cleaning
You can also use a soft sponge to wipe down window sills.
  • For simple dirt and grime: mix water and soap in a spray bottle and wipe clean.
  • For difficult stains or to remove mildew: dip a sponge in a mixture of water and vinegar and wipe clean, making sure to towel dry the moulding once you’re finished.
  • For water spots: clean the trim with distilled water, bottle water, or a spray bottle filled with rubbing alcohol and towel dry to prevent new water spots.

Check out the full article to get prevention and maintenance tips for window moulding.

Polish Paneling

Cleaning wood paneling, whether it’s wainscoting, chair rail, judges paneling or any other type of paneling, is quite simple. According to Home Guides – SFGate, all you really need are a few household ingredients and oils to help make it shine.

polishing paneling
Use a soft cloth to really make your paneling shine!
  • Vacuum or dust cloth
  • ½ cup dishwashing liquid (or all-purpose detergent) mixed with 1 gallon warm water
  • Rag or sponge
  • Dry towel
  • Bucket of clear water with ½ cup white vinegar
  • Few drops of mineral oil

Check out the full article for step-by-step cleaning instructions.

If you’d like to spend less time maintaining your interior moulding, Finished Elegance is an excellent option. Finished Elegance is coated on all sides with Eastman Cerfis™ technology, making it more resistant to scuffs. You can see a complete list of Finished Elegance products here.

We hope these tips help you get a jump start on spring cleaning. Stay tuned next week to get our best advice for cleaning your doors.